Tag Archives: Gate Design

Cleft Chestnut Rustic Garden Gate

Cleft chestnut rustic garden gate

So we’ve made a cleft chestnut rustic garden gate for a fencing contractor. It’s been a while and is good to get back into the swing again.

Cleft chestnut rustic garden gate Cleft chestnut rustic garden gate Cleft chestnut rustic garden gate Cleft chestnut rustic garden gate Cleft chestnut rustic garden gate

I started yesterday with a log of chestnut that we’d harvested from our coppice in the heart of Dorset. This I cleaved (split down the grain) for the stiles and rails. The rails are morticed into the stiles and fixed with cleft oak pegs. The diagonal brace was cleft from a bent log so it can bend round the rails and blind-morticed into the stiles for extra strength.

Sweet Chestnut is an incredibly resilient hardwood and this gate should last for many, many years with little or no maintenance.

Artisan Gardening will make your garden gates to order to suit your requirements. The gates are made from Sweet Chesnut that is cleft to size using traditional tools and methods. The gates are made using no metal fixings save the occasional brass screw.

Oak Driveway Gates

Asymmetric curved oak driveway gates

Here’s a recently completed pair of oak driveway gates made for a client that we met at the Stock Gaylard Oak Fair back in the summer. They feature curved rails and braces with asymmetric opening.

The gates are made from air dried oak to minimise movement as the timbers acclimatise and weather. All structural joints are mortice and tennon with oak draw dowels. The hinges and latches were forged at the Dorset Forge specifically to fit the curve of the rails. The gates have a sanded finish and have been treated to an undercoat and two top coats of OSMO UV Protection Oil.

 

 

Asymmetric curved oak driveway gatesAsymmetric curved oak driveway gates

 

Oak Driveway Gates

Design for asymmetric, curved top, oak driveway gates.

This design for Oak Driveway Gates has just been accepted by the client, we’re rather excited about making these we is..! Going to be made in seasoned oak over the coming weeks.

The client is keen to direct visitors up the left side of the drive hence the asymmetric design. The curved top rail, centre rail and bracings add to the balance in the asymmetry and should be fun to make!

Design for asymmetric, curved top, oak driveway gates.

Design for asymmetric, curved top, oak driveway gates.

« Older Entries